Vibe Metallic Blockout - Lava MetallicVibe Metallic Blockout - Lava Metallic
Vibe Metallic Blockout - Lava Metallic

Vibe Metallic Blockout - Lava Metallic
SCMVM-LAV

Order
was: $2
$0
You save: $2
per unit
Add to wish list

FEATURES

Combine style, function and total sun blockout with a Custom Made Kirra Sunblock Roller Blind.

100% Sun Blockout: The soft and elegant Kirra fabric range provides 100% sun blockout and complete privacy
 Quality: Award winning Australian Made fabric combined with Quality craftsmanship and materials
Affordability Cost-effective up front with long term savings through energy efficient fabric
Choice of colours: A selection of 7 designer colours with new colours continually added
Stylish Coordinated Components: Colour coordinated bottom rail and chain
Chain Side Winder Mechanism: Simply wind up and wind down, dependably stops and holds blind at required height
Simple and smooth operation: Wind up / wind down function and a choice of left or right hand   operation
Easy Installation: Printed, easy to follow installation instructions will have your Blockout Roller Blinds self-installed in minutes
Easy Maintenance: Occasional dusting or vacuuming with a soft brush attachment is all that’s required. If soiled, may be spot washed with a sponge and mild bleach free detergent

 

BENEFITS

Custom Made Kirra Blockout Roller Blinds provide many benefits beyond just covering your windows.

Privacy: Complete window coverage for complete privacy
UV Protection: Blockout 100% of harmful UV rays to protect your furniture and carpets
Energy efficient 100% blockout fabric, rubber and foam lined provides insulation and long term energy savings
Versatility:  A simple pull on the chain to turn day into night and night into day
Simplicity: Easy to install, easy to use and easy to maintain
Safety: Compliant with Australian Safety Standards and the Child Safety Act
Warranty: 2 year product warranty
Easy ordering and prompt delivery: Simply place your order online and your blinds will be delivered direct to your door.

 

COMPOSITION

Fabric: 'Kirra' range - award winning UV treated polyester fabrics. 'Soft to touch' blockout flock coating
Hem: No side hems or stitching
Chain High quality chain
Bottom base rail: Oval shaped, powder coated aluminium. Colour choice: White, White-Birch, Black, Polished Aluminium or Satin Aluminium
Brackets: Colour matched
Inner Tube: 38mm heavy duty aluminium inner tube

 

CUSTOM MADE MEASUREMENTS

Minimum width: 360mm
Maximum width 2400mm
Maximum drop: 3000mm
Reveal mount minimum sill depth: 60mm

 

OPERATION - Fabric Roll options

Back Rolled (standard): Keeps fabric close to glass 
Front Rolled:   Keeps fabric away from the glass 

 

HARDWARE - What's in the box?

Your Custom Made Blockout Roller Blinds will be delivered with:

  • Chain and chain tension safety device
  • Colour matched bottom rail and chains
  • Child safety features
  • Installation Screws
  • Mounting Brackets
  • Easy installation instructions

DELIVERY INFORMATION

FREE Delivery on all Blinds.

READYMADE BLINDS  
  • 5-7 Business Days
CUSTOM BLINDS
  • 15-21 Business Days
SHIPPING METHOD
  • Delivered to your door via Interstate Courier Companies. PO Box addresses are NOT accepted for delivery.
SAMPLES
  • FREE Shipping

Please Note:  In the event you are not home at the time of delivery, courier companies will leave a calling card advising they have tried to deliver your order.  You will be asked to call the courier depot to arrange a suitable delivery day. Please note that courier companies will not call prior to delivering your goods regardless of requests made on your behalf

HOWEVER ... some couriers will charge an additional delivery fee for this second delivery.

Super Blinds Mart suggests that if you are not going to be home when your order is due for delivery, that you advise us to deliver to a work address or neighbour/family member or friend who you know will be available to receive your order on the first delivery. Please do this at the time of placing your order by including this information under 'Special Instructions

 

INSIDE MOUNT

STANDARD WINDOW – INSIDE MOUNT – BLIND IS FITTED INSIDE THE WINDOW OPENING

It is industry standard for blinds fitting into the window reveal to sit flush with the front of the reveal. The factory will make the appropriate deductions for the product type and fixing position.

WIDTH

Venetian Neat Measure Width Venetian Neat Measure Drop
Measure neat width at 3 points.
Use shortest width.
Measure neat drop at 3 points
  • Measure neat internal width of reveal
  • Measure at three width points – top, middle and base of reveal. This will be the bracket to bracket measurement. Use the shortest width.


DROP

  • Measure at three drop points – left, middle and right of reveal.
  • It is not critical to use the shortest drop for this product but client should be advised if window is "out of square". Blinds can only be made square so if window is out of square it may result in irregular light gaps around the blind. Advise your client.


Note – The blind fabric (skin) will be narrower than the bracket to bracket measurement. Refer to “Side/Light Gap” notes in Specifications. If blind is an inside mount there will be light gaps on each side of blind. Advise your client.


 

OUTSIDE MOUNT – Blind Fitting Onto Architrave

STANDARD WINDOW – OUTSIDE MOUNT – BLIND FITTING ONTO ARCHITRAVE

WIDTH

Venetian Measure Width Venetian Measure Drop
Measure width at 3 points
Use largest width
Measure drop at 3 points
Use longest drop
  • Measure from outside edge of architrave to outside edge of opposite architrave at three points – top, middle and base.
  • Use the largest width measurement.


DROP

  • Measure from top of architrave to base of lower architrave or floor. Measure at three drop points.
  • Use the longest drop measurement.

Note – the blind fabric (skin) will be narrower than the bracket to bracket measurement. Refer to "Side/Light Gap" notes in Specifications. Some architrave will be visible on each side of blind.


 

Outside Mount – Blind Fitting onto Wall

This will occur in situations where there is no architrave or when you wish to reduce the amount of window area that will be covered by the stack up of the blind.

WIDTH

  • Measure minimum of 50mm past each side of window opening

DROP

  • If fitting blind into plaster or concrete – measure minimum of 70mm above window opening to a minimum of 50mm below window opening or to the floor.

If fitting blind into brick – measure from top of first brick to a minimum of 50mm below window opening or to the floor.

Outside Mount measurements

Measure 70mm above opening drop
or to top of first brick

Measure 50mm past opening width

 
Measure 50mm below opening or to floor  

 


Corner Window - Inside Mount

(Blinds fitting side by side not using link bracket)

Option One
Corner Roller Option One
 
Option Two
Corner Roller Option Two

INSIDE MOUNT CORNER WINDOW

  • Follow standard measuring principles.

Check that the reveal is deep enough to fit the roller system that you are using. Refer to the Projection notes in Specifications. Check for anything that may impede operation of blind e.g. window locks. 

OPTION ONE (Through Blind)

  • Determine which window is the main window from a privacy, light block or aesthetic reason. This will be the “through” blind, as the gap between the blinds will sit in front of the window that the “butt” blind covers.
  • Measure at front of reveal.
  • Measure the width of Blind 1 from point A to B
  • Measure the width of Blind 2 from point C to D to the front of the reveal. Both blinds will sit flush with the front of the reveal. 

OPTION TWO (Butting Blinds)

  • Measure at front of reveal.
  • Measure the width of Blind 1 from point A to B
  • Measure the width of Blind 2 from point C to D to the front of the reveal. Both blinds will sit flush with the front of the reveal.

Note -

  • Reverse roll will provide better coverage and a smaller corner gap than standard roll. A gap in the corner where the blinds meet can not be avoided. Advise your client. It is advisable to not situate the control chains in the corner as they will be difficult to access for operation.
  • It is advisable to not situate the control chains in the corner as they will be difficult to access for operation.
  • Thick fabrics and/or large drops may result in the fabric protruding past the bracket when rolled up. Please allow for this when calculating deductions.

 


Corner Window - Outside Mount

(Blinds fitting side by side not using link bracket)

Option One
Corner Roller Option One
 
Option Two
Corner Roller Option Two

INSIDE MOUNT CORNER WINDOW

  • Follow standard measuring principles.

OPTION ONE (Through Blind)

  • Determine which window is the main window from a privacy, light block or aesthetic reason. This will be the “through” blind, as the gap between the blinds will sit in front of the window that the “butt” blind covers.
  • Measure at front of reveal.
  • Measure the width of Blind 1 from point A to B
  • Measure Blind 2 from point C to D to the front of the reveal. Both blinds will sit flush with the front of the reveal. Deduct the necessary measurement depending on the roller blind system used.  

OPTION TWO (Butting Blinds)

  • Measure at front of reveal.
  • Measure the width of Blind 1 from point A to B
  • Measure the width of Blind 2 from point C to D to the front of the reveal. Both blinds will sit flush with the front of the reveal.
  • Deduct the necessary measurement from both Blinds 1 & 2 depending on the roller blind system used

Note -

  • Reverse roll will provide better coverage and a smaller corner gap than standard roll. A gap in the corner where the blinds meet can not be avoided. Advise your client. It is advisable to not situate the control chains in the corner as they will be difficult to access for operation.
  • It is advisable to not situate the control chains in the corner as they will be difficult to access for operation.

 

shopping online
MADE EASY
Less than 7 days Delivery available Brand Tested for peace of mind Premium site security Five year warranty on products

Here are some more great reasons to choose Super Blinds Mart.