Sale!

product specifications

Width info here Drop info here Can't find an exact fit. Customise your product with our Custom Cut feature Choose from the available options
  • Viewscreen – Charcoal/Bronze Charcoal/Bronze
  • Viewscreen – Charcoal/Grey Charcoal/Grey
  • Viewscreen – Linen Linen
  • Viewscreen – Caramel Caramel
  • Viewscreen – White/Pearl White/Pearl
ID# CURB5

Roller Sunscreen – Viewscreen 2500

SOLD (11)

Customise Size

Clear
SKU: CURB5 Categories: ,

Order Free Sample

COMPOSITION

Fabric: ‘Viewscreen’ range – award winning UV treated polyester fabric
Hem: No side hems or stitching
Chain: High quality chain
Bottom base rail: Oval shaped, powder coated aluminium. Colour choice: White, Ivory, Black, Polished Chrome or Satin Chrome
Brackets:
Individual blinds under 6m² 50.9mm deep x 68.3mm high
Individual blinds between 6m² and 7.5m² 56.0mm deep x 73mm high
Individual blinds over 7.5m² 69.1mm deep x 76.4mm high
Colour matched
Tube Sizing:
Blinds up to 2410mm W or 6m² 38mm tube
Blinds between 6m² and 7.5m² 50mm tube
Blinds over 7.5m² 63mm tube

CUSTOM MADE MEASUREMENTS

Minimum width: 360mm
Maximum width: 2420mm
Maximum drop: 3000mm
Projection to front of blind:
Blinds up to 2410mm W or 6m² – Inside Mount 57mm Outside Mount 72mm
Blinds between 6m² and 7.5m² – Inside Mount 89mm Outside Mount 98mm
Blinds over 7.5m² – Inside Mount 103mm Outside Mount 121mm

OPERATION – Fabric Roll options

Back Rolled (standard): Keeps fabric close to glass
Front Rolled: Keeps fabric away from the glass

HARDWARE – What’s in the box?

Your Custom Made Blockout Roller Blinds will be delivered with:

  • Chain and chain tension safety device
  • Colour matched bottom rail and chains
  • Child safety features
  • Installation Screws
  • Mounting Brackets
  • Easy installation instructions

INSIDE MOUNT

STANDARD WINDOW – INSIDE MOUNT – BLIND IS FITTED INSIDE THE WINDOW OPENING

It is industry standard for blinds fitting into the window reveal to sit flush with the front of the reveal. The factory will make the appropriate deductions for the product type and fixing position.

FACTORY STANDARD DEDUCTIONS

INSIDE MOUNT WIDTH DEDUCTION (bracket to bracket measurment) 0mm
INSIDE MOUNT DROP DEDUCTION 0mm

WIDTH

  • Measure neat internal width of reveal
  • Measure at three width points – top, middle and base of reveal. This will be the bracket to bracket measurement. Use the shortest width.

DROP

  • Measure at three drop points – left, middle and right of reveal.
  • It is not critical to use the shortest drop for this product but client should be advised if window is “out of square”. Blinds can only be made square so if window is out of square it may result in irregular light gaps around the blind. Advise your client.

Note

The blind fabric (skin) will be narrower than the bracket to bracket measurement. Refer to “Side/Light Gap” notes in Specifications. If blind is an inside mount there will be light gaps on each side of blind. Advise your client.


OUTSIDE MOUNT – Blind Fitting Onto Architrave

STANDARD WINDOW – OUTSIDE MOUNT – BLIND FITTING ONTO ARCHITRAVE

FACTORY STANDARD DEDUCTIONS
OUTSIDE MOUNT WIDTH DEDUCTION (bracket to bracket measurment) 0mm
OUTSIDE MOUNT DROP DEDUCTION 0mm

WIDTH

  • Measure from outside edge of architrave to outside edge of opposite architrave at three points – top, middle and base.
  • Use the largest width measurement.

DROP

  • Measure from top of architrave to base of lower architrave or floor. Measure at three drop points.
  • Use the longest drop measurement.

Note

the blind fabric (skin) will be narrower than the bracket to bracket measurement. Refer to “Side/Light Gap” notes in Specifications. Some architrave will be visible on each side of blind.


Outside Mount – Blind Fitting onto Wall

This will occur in situations where there is no architrave or when you wish to reduce the amount of window area that will be covered by the stack up of the blind.

WIDTH

Measure minimum of 50mm past each side of window opening

DROP

If fitting blind into plaster or concrete – measure minimum of 70mm above window opening to a minimum of 50mm below window opening or to the floor.

If fitting blind into brick – measure from top of first brick to a minimum of 50mm below window opening or to the floor.


Corner Window – Inside Mount

(Blinds fitting side by side not using link bracket)

INSIDE MOUNT CORNER WINDOW

Follow standard measuring principles.
Check that the reveal is deep enough to fit the roller system that you are using. Refer to the Projection notes in Specifications. Check for anything that may impede operation of blind e.g. window locks.

OPTION ONE (Through Blind)

  • Determine which window is the main window from a privacy, light block or aesthetic reason. This will be the “through” blind, as the gap between the blinds will sit in front of the window that the “butt” blind covers.
  • Measure at front of reveal.
  • Measure the width of Blind 1 from point A to B
  • Measure the width of Blind 2 from point C to D to the front of the reveal. Both blinds will sit flush with the front of the reveal.

OPTION TWO (Butting Blinds)

Measure at front of reveal.
Measure the width of Blind 1 from point A to B
Measure the width of Blind 2 from point C to D to the front of the reveal. Both blinds will sit flush with the front of the reveal.

Note

  • Reverse roll will provide better coverage and a smaller corner gap than standard roll. A gap in the corner where the blinds meet can not be avoided. It is advisable to not situate the control chains in the corner as they will be difficult to access for operation.
  • It is advisable to not situate the control chains in the corner as they will be difficult to access for operation.
  • Thick fabrics and/or large drops may result in the fabric protruding past the bracket when rolled up. Please allow for this when calculating deductions.

Corner Window – Outside Mount

(Blinds fitting side by side not using link bracket)

INSIDE MOUNT CORNER WINDOW

Follow standard measuring principles.

OPTION ONE (Through Blind)

  • Determine which window is the main window from a privacy, light block or aesthetic reason. This will be the “through” blind, as the gap between the blinds will sit in front of the window that the “butt” blind covers.
  • Measure at front of reveal.
  • Measure the width of Blind 1 from point A to B
  • Measure Blind 2 from point C to D to the front of the reveal. Both blinds will sit flush with the front of the reveal. Deduct the necessary measurement depending on the roller blind system used.

OPTION TWO (Butting Blinds)

  • Measure at front of reveal.
  • Measure the width of Blind 1 from point A to B
  • Measure the width of Blind 2 from point C to D to the front of the reveal. Both blinds will sit flush with the front of the reveal.
  • Deduct the necessary measurement from both Blinds 1 & 2 depending on the roller blind system used

Note

  • Reverse roll will provide better coverage and a smaller corner gap than standard roll. A gap in the corner where the blinds meet can not be avoided. It is advisable to not situate the control chains in the corner as they will be difficult to access for operation.
  • It is advisable to not situate the control chains in the corner as they will be difficult to access for operation.

Download Guide

FREE DELIVERY ON ALL BLINDS, CURTAINS, ACCESSORIES & SAMPLES*

READY MADE BLINDS
5-7 Business Days via Interstate Courier

CUSTOM MADE BLINDS
15-21 Business Days via Interstate Courier

RAINBOW, SHADOW, VITROM & MONO VENETIANS
25-30 Business Days via Interstate Courier

CURTAINS & ACCESSORIES
3-5 Business Days via Interstate Courier

SAMPLES
3-5 Business Days via Australia Post
*FREE Shipping up to 20 items. $2 per sample when more than 20 items requested.

SHIPPING METHOD
Delivered to your door via Interstate Courier Companies. PO Box addresses are NOT accepted for delivery.


Please Note: In the event you are not home at the time of delivery, courier companies will leave a calling card advising they have tried to deliver your order. You will be asked to call the courier depot to arrange a suitable delivery day. Please note that courier companies will not call prior to delivering your goods regardless of requests made on your behalf.

HOWEVER… some couriers will charge an additional delivery fee for this second delivery.

Super Blinds Mart suggests that if you are not going to be home when your order is due for delivery, that you advise us to deliver to a work address or neighbour/family member or friend who you know will be available to receive your order on the first delivery. Please do this at the time of placing your order by including this information under Special Instructions